Makita EK6101 Manuel D’Utilisation
15
Refuelling
IMPORTANT:
IMPORTANT:
FOLLOW THE SAFETY PRECAUTIONS!
Be careful and cautious when handling fuels.
The engine must be turned off and cooled down!
Carefully clean the area around the fuel-tank Þ ller neck to keep
dirt from getting in the tank.
dirt from getting in the tank.
Place the Power Cut on an even surface.
Unscrew the tank cap and Þ ll tank with fuel mixture. Take care
to avoid spilling.
to avoid spilling.
Screw the tank cap back on hand-tight.
Clean screw cap and tank after refuelling. Never start or
operate the Power Cut in the same place as it was
fuelled!
Clean screw cap and tank after refuelling. Never start or
operate the Power Cut in the same place as it was
fuelled!
If fuel gets on your clothing, change clothes immediately.
Fuel mixture
Starting the engine
if
necessary
CAUTION:
Observe the SAFETY INSTRUCTIONS on page 4 and 5!
Start the Power Cut only after complete assembly and
inspection!
Move at least 3m away from the place where you fuelled
the Power Cut.
inspection!
Move at least 3m away from the place where you fuelled
the Power Cut.
Make sure you have a good footing, and place the Power
Cut on the ground in such a way that the cutting disc is
not touching anything.
Cut on the ground in such a way that the cutting disc is
not touching anything.
3 Meter