Multiquip ga6HEB Manuel D’Utilisation

The Multiquip GA6HB/GA6HEB generator is designed as 

a portable dual purpose power source for 60 Hz (single 

phase) lighting facilities, power tools, submersible pumps 

and other industrial and construction machinery. 
The generator is mounted on rubber vibration isolators 

that have a steel base backplate which is attached to the 

protective steel pipe carrying frame. 
The protective carrying frame is made of steel tubing and 

fully wraps around the generator to protect against damage. 

Reference Figure 3, Figure 4 and Figure 7 for the basic 

controls and indicators for the GA6HB/GA6HEB generators.
These portable generator are supplied with a electrical 

control box (panel). To reduce vibration caused by the 

engine, the  control box is also placed on rubber isolators. 

The control panel is provided with the following:

 

„

120V Twist-Lock Output Receptacle (L5-20R)

 

„

120V Twist-Lock Output Receptacle (L5-30R)

 

„

120/240V Twist-Lock Output Receptacle (L14-30R)

 

„

120 VAC GFCI Receptacle (2)

 

„

GFCI Sensing Module

 

„

23 Amp Main Circuit Breaker.

 

„

AC Voltmeter

 

„

Idle Control Switch

 

„

Full Power Switch

 

„

Operation Switch

 

„

Start Switch (GA6HEB only)

Before connecting this generator to any building’s 

electrical system, a licensed electrician must install an 

isolation (transfer) switch.
Serious injury or death may result without this transfer 

switch.