Shure MX400D Manuel D’Utilisation

Page de 20
MX400D
/C (R185)
/S (R184)
 
Shure Microflex
®
 MX400D Series microphones 
are miniature electret condenser gooseneck mi-
crophones with a desktop base and a 3 m (10 ft.) 
cable. Desktop base allows microphones to be 
used in multi-purpose rooms where quick setup 
is required, or where permanent installation is 
impractical.
Features
•  Wide dynamic range and frequency response 
for accurate sound reproduction
•  Interchangeable cartridges that provide a 
choice of polar pattern for each application
•  Programmable mute button and LED indicator
•  Logic input and output terminals for remote 
control or use with automatic microphone 
mixers
•  Balanced, transformerless output for increased 
immunity to noise over long cable runs
•  RF filtering
MX400 Series Model Variations
MX400 microphones are available with 305 mm 
(12 in.) or 457 mm (18 in.) goosenecks. 
•  “S” models include a mute button and LED. 
•  “D” models include a desktop base with 
programmable mute button and LED and logic 
input and output. 
•  “SE” models feature a surface mount flange 
with side-exit cable.
The polar pattern of the included cartridge is indi-
cated by a model number suffix:
/C Cardioid
/S Supercardioid
/N Cartridge not included
Interchangeable Cartridges
Microflex microphones use 
interchangeable cartridges 
that allow you to choose 
the polar pattern for differ-
ent installations.
Snap-Fit Windscreen
•  Snap into the groove 
below the cartridge.
•  To remove, spread 
the gap with a 
screwdriver or 
thumbnail.
•  Provides 30 dB of 
“pop” protection.
Microphone Placement
•  Aim the microphone toward the desired source, 
such as the talker.
•  Aim it away from any unwanted source, such 
as a loudspeaker.
•  Place the microphone within 15 to 30cm (6 to 
12 in.) of the desired sound source.
•  Always use the supplied windscreen or optional 
metal windscreen to control breath noise.
•  If four or more microphones will be open at 
the same time, use of an automatic mixer, 
such as the Shure SCM810 or SCM410, is 
recommended.
Securing to a Surface
Desktop Microphones
R183 Omnidirectional
R184 Supercardioid
R185 Cardioid
2