Sony Camcorder / Wireless Microphone Manuel D’Utilisation
Works with: Any consumer camcorder. Mount via supplied case/mount and 1/8” stereo mini-plug connector. For
camcorder models using the A-8278-057-A or BKW-L601 bracket, the WRR-805A may be mounted using an optional,
dual mounting adapter (X-0248-167-1).
camcorder models using the A-8278-057-A or BKW-L601 bracket, the WRR-805A may be mounted using an optional,
dual mounting adapter (X-0248-167-1).
Anton Bauer Adapter System (for use with compatible Anton Bauer NiCad
batteries).
batteries).
The WRR-805A
Tuner shown
mounted to a DCR-
VX100 0camcorder.
Using a locking
Velcro strap,
mounting to the
camcorder is very
easy. The mount
also rotates to
facilitate the proper
angle for reliable
reception.
Tuner shown
mounted to a DCR-
VX100 0camcorder.
Using a locking
Velcro strap,
mounting to the
camcorder is very
easy. The mount
also rotates to
facilitate the proper
angle for reliable
reception.
The ”4-hole” mount is used
by several Sony professional
camcorder bracket systems,
including:
•
A-8278-057-A (included
with: BKW-L601, BKW-
L201, BKW-L403)
with: BKW-L601, BKW-
L201, BKW-L403)
•
X-0248-167-1
•
BTA-801
•
NP-1
•
DC-500
•
Anton Bauer QR-SDH or
QR-DSR with ABWMK-
KIT
QR-DSR with ABWMK-
KIT
The ”V-Wedge” mount is
used by:
used by:
•
CA-WR855 (for DSR-
300 & 500 only)
300 & 500 only)
The 4 rear-mounting screw
holes will allow attachment
of the A-8278-057-A bracket,
alternatively.
holes will allow attachment
of the A-8278-057-A bracket,
alternatively.
Balanced mic/line inputs 1 & 2 (left) and 4-pin DC
connector (right) on back of DSR-500 camcorder.
Standard connectors on all Broadcast model Sony
Standard connectors on all Broadcast model Sony
camcorders BETACAM, BetaSP, Digital Beta,
HDCAM, DV (located opposite side on some models).
Anton Bauer QR-SDH
battery adapter shown
with ABWMK-KIT
mounted. The ABWMK-
KIT comes supplied with
a side mount and rear-
mount plate adapter.
These are both configured
like the 4-hole mounting
system above and allows
mounting of the BTA-
801, WRR-810A or X-
0248-167-1 mounting
adapter.
Anton Bauer QR-SDH
Shown again with just the
side plate portion of the
ABWMK-KIT. This side
plate has three screw
positions for mounting at
various distances from the
battery.
*Note : The BTA 801A
may be mounted to either
of these two plates.
However, the user will
need to provide a slightly
longer DC cable, as the
one supplied with the
BTA-801A
Configuration # 4 WRR-805A UHF Tuner
Sony Wireless Mounting Standards
-8-
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16