Sound Performance Lab 2485 Manuel D’Utilisation

As with its predecessor, the model 9844 GoldMike, the 
GoldMike MK2 features our sound-optimizing Flair circuitry. This 
circuitry takes advantage of a combined coil and tube filtering 
to enhance signal presence. In comparison to simple EQ manip-
ulation, this intensified presence sounds very natural and unob-
trusive, and is particularly suited for optimizing the overtones 
in voice and acoustic instruments. 

Through Flair, a recorded signal gains richness in detail, pres-
ence, intelligibility (for voice) and in an increased ability to cut 
through in a mix. In such mixes, a Flair-processed signal stands 
out without resort to conventional processing often unsuited to 
the task, saving both time and a need for artificial processing.

Flair works through an emphasis in the 1.5-20 kHz range centered 
around 6 kHz.

The GoldMike MK2 provides for two different settings, with a 
“High” setting of +2.5 dB and a “Med.” with +1.5 dB emphasis.  
An Off setting allows you to deactivate the Flair circuit entirely.   

The Tube Amp switch varies the degree of tube pre-amplifica-
tion added to the discrete class A pre-amplification, which 
itself is set with the Gain control. The switch allows for three 
settings: +6 dB (standard) +12 dB and +18 dB. In each setting, 
the output of the tube is automatically reduced in proportion 
to the increased input, thus eliminating affects to the overall 
output level - there is no need to recalibrate. This allows for 
instant comparison between varying Tube Amp values and their 
sonic effects (see „About Gain Adjustments” on page 10).