Alesis 03D Manuel D’Utilisation

MIDI Setup

selecting the SETUP switch and then pressing the [ENTER] button. If you are using a 
mouse, simply click the SETUP switch. The following dialog box appears.

These setting are really intended for those who write their own computer programs to 
control the 03D. You should not change them unless you know what you are doing. If 
you are using a standard MIDI sequencer program, use the following settings.

The x2, 

÷

2, and 

÷

4 settings apply only to the 31.25K BAUD RATE.

If the 38.4K or 19.2K BAUD RATE is used, Tx CLOCK is fixed at OFF.

The MIDI Setup page is used to configure basic 03D MIDI parameters, such as MIDI 
transmit (Tx) and receive (Rx) Channels, OMNI on/off, echo on/off, and so on.

button to set them. Use the PARAMETER wheel to set the rotary controls.
If you are using a mouse, simply click the parameter switches and drag the rotary con-
trols.

—Program Change messages are used to recall mix scenes. See 

Program Change Assign on page 239 for more information. The four switches in this 
group are as follows. Tx determines whether or not the 03D transmits Program Change 
messages. Rx determines whether or not the 03D receives Program Change messages. 
OMNI determines whether or not the 03D receives Program Change messages on all 16 
MIDI Channels. When OMNI is on, Program Change messages are received regardless 
of the MIDI CHANNEL Rx parameter settings. ECHO determines whether or not Pro-
gram Change messages are echoed to the MIDI OUT. 

—Control Change messages are used to control 03D parameters 

in real time. See Control Change Assign on page 240 for more information. The four 
switches in this group are as follows. Tx determines whether or not the 03D transmits 

31.25K 
(Some Windows PC software 
may need to use 38.4K)

x32

OFF