Roland VK-8 Manuel D’Utilisation
49
Advanced Use
Settings That Are Saved for
the Entire System
the Entire System
■
Rotary-related Settings
1.
Hold down the HARMONIC BAR PART [UPPER] and
[PEDAL] buttons and press the [TONE WHEEL]
button.
The indicators of the buttons [1]–[8] will blink.
2.
Press one of the buttons from [1] through [8] to select
the parameter that you want to edit.
There are 14 rotary-related parameters. You can select all
of these parameters by controlling the lighted/
extinguished state of the [PRESET] button’s indicator.
of these parameters by controlling the lighted/
extinguished state of the [PRESET] button’s indicator.
The following parameters are assigned to each button.
[PRESET] button’s indicator extinguished
[PRESET] button’s indicator lighted
3.
Turn the [VIBRATO AND CHORUS] knob to adjust
the setting.
If you press the VIBRATO AND CHORUS [ON] button,
the setting will return to the initial value.
the setting will return to the initial value.
4.
If you want to adjust the setting of another parameter,
press the appropriate button from [1] through [8] to
select the parameter, and turn the [VIBRATO AND
CHORUS] knob to adjust the setting.
When you want to stop editing, press the HARMONIC
BAR PART [UPPER] button.
BAR PART [UPPER] button.
5.
Press the [WRITE] button to finalize the settings of the
rotary-related parameters.
Parameter settings will be saved.
While the parameters are being saved, the indicators of
the [1]–[8] buttons will blink.
the [1]–[8] buttons will blink.
NOTE
Never turn off the power while parameters are being saved.
Button
Parameter
Page
[1]
ROTARY WOOFER LEVEL
[2]
ROTARY TWEETER LEVEL
[3]
ROTARY WOOFER RISE TIME
[4]
ROTARY TWEETER RISE TIME
[5]
ROTARY WOOFER FALL TIME
[6]
ROTARY TWEETER FALL TIME
[7]
ROTARY WOOFER SPREAD
[8]
ROTARY TWEETER SPREAD
Button
Parameter
Page
[1]
ROTARY WOOFER SPEED SLOW
[2]
ROTARY TWEETER SPEED SLOW
[3]
ROTARY WOOFER SPEED FAST
[4]
ROTARY TWEETER SPEED FAST
[5]
ROTARY MIC DISTANCE
[6]
ROTARY RANDOMIZE