Roland BR-900CD Manuel D’Utilisation
196
Initializing the BR-900CD’s Settings
Initializing the Memory Card
Be aware that when initialized, any existing data on the card
will be erased.
will be erased.
* If you initialize the memory card supplied with the BR-
900CD, the demo songs on the card will be lost.
Before you insert or remove a memory card, always turn off
the BR-900CD first. If a memory card is inserted when the
power is turned on, the data in the memory card may be
destroyed, or the memory card may become unusable.
the BR-900CD first. If a memory card is inserted when the
power is turned on, the data in the memory card may be
destroyed, or the memory card may become unusable.
1. Press [UTILITY].
2. Press CURSOR [
] [
] to move the cursor to “INI,”
and press [ENTER].
fig.05-609d
3. Press CURSOR [
] [
] to move the cursor to
“CARD,” and press [ENTER].
The confirmation message “Are you sure?” appears in
the display.
the display.
fig.05-610d
4. To continue the initialization, press [ENTER] (YES).
To cancel, press [EXIT] (NO) (or [UTILITY]).
When [ENTER] is pressed, initialization begins.
When the initializing has been completed, “Completed!”
appears in the display.
appears in the display.
“Keep power on! Song creating...” then appears in the
display, and a new song is automatically created.
display, and a new song is automatically created.
In this case, the data type selected is HiFi (MT2).
When creation of the song is finished, the play screen
returns to the display.
returns to the display.
* Depending on the capacity of the memory card, initializing
may take more than ten minutes to complete. This is not a
malfunction. The progress of the initializing is shown in the
display. Do not turn off the BR-900CD until the initializing
has been completed.
malfunction. The progress of the initializing is shown in the
display. Do not turn off the BR-900CD until the initializing
has been completed.
Do not remove the memory card or turn off the BR-900CD
while the display shows “Keep power on!” Doing so can
destroy the data on the memory card and/or render the
memory card itself unusable.
while the display shows “Keep power on!” Doing so can
destroy the data on the memory card and/or render the
memory card itself unusable.