Roland LX-10 Manuel D’Utilisation

 

Connecting to Other Devices

 

The following become possible once you connect a USB cable 

(available separately) between the USB (MIDI) connector on the 

LX-10’s Bottom panel (front bottom left) and the USB connector 

of your computer.

•

You can use the LX-10 to play sounds from SMF music files 

played back with MIDI software.

•

By exchanging MIDI data with sequencer software, you can 

save songs recorded with the LX-10 to your computer, and 

enjoy a variety of musical control and editing features.

Connect the LX-10 to your computer as shown below.

* Refer to the Roland website for system requirements. 

Roland website: http://www.roland.com/

 

Normally, you don’t need to install a driver in order to connect 

the LX-10 to your computer. However, if some problem occurs, or 

if the performance is poor, using the Roland original driver may 

solve the problem.

For details on downloading and installing the Roland original 

driver, refer to the Roland website.

Roland website: http://www.roland.com/

Specify the USB driver you want to use, and then install the 

USB

connector

USB connector

USB cable

Computer

•

To prevent malfunction and/or damage to speakers or 

other devices, always turn down the volume, and turn 

off the power on all devices before making any 

connections.

•

Only MIDI data can be transmitted using USB.

•

USB cables are not included. Consult your Roland dealer 

if you need to purchase.

•

Turn on the power to the LX-10 before starting up MIDI 

applications on the computer. Do not turn the LX-10 on 

or off while any MIDI application is running.

LX-10_e.book 95 ページ ２００８年９月２２日　月曜日　午前１０時５１分