Roland SH-32 Manuel D’Utilisation
34
Modifying the Sound
5. Adding an Effect
You can add effects to the sound created so far. The SH-32 has two independent
effects processors; one of them provides spatial effects such as reverb and delay
(Reverb/Delay), while the other is used for inserting distortion, phaser, tremolo, and
other various effects (Insertion Effects).
effects processors; one of them provides spatial effects such as reverb and delay
(Reverb/Delay), while the other is used for inserting distortion, phaser, tremolo, and
other various effects (Insertion Effects).
fig.031
1
Press [INS-FX] or [REV/DELAY].
When you press [INS-FX], the button lights up, and the Insertion Effects is turned on.
When you press [REV/DELAY], the button lights up, and the Reverb/Delay
processor is turned on.
processor is turned on.
2
Select an effect type and set the rate.
To set the Insertion Effects, turn [INTENSITY] to adjust the intensity, and use the
FX/SYSTEM knob and [VALUE ▼/▲] to set the type and other details.
FX/SYSTEM knob and [VALUE ▼/▲] to set the type and other details.
To set the Reverb/Delay, use the FX/SYSTEM knob and [VALUE ▼/▲] to set the
value.
value.
The effect types and values are shown in the display. See
Are you satisfied with the sound you created?
The sound settings created so far will be lost when you switch off the SH-32. Let’s
now save the sound into the internal memory.
now save the sound into the internal memory.
details on effects.
Display
1
2
You can use the Insertion
Effects and Reverb/Delay at
the same time. You can also
line them up in series or in
parallel (p. 64).
Effects and Reverb/Delay at
the same time. You can also
line them up in series or in
parallel (p. 64).