Roland RG-3M Manuel D’Utilisation

Page de 132
 
62
Chapter 3. Performance
 
 
Adjusting the Sound to Achieve the Preferred 
Tone Quality (Equalizer)
 
The RG-3M features a built-in, three-band digital equalizer.
An equalizer boosts or cuts specific sound pitches (frequency ranges) to 
adjust the sound balance for the overall performance. 
For example, you can boost the highs to get a crisper sound, or boost the low 
end for a more powerful sound.
You can also adjust the sound to compensate for the acoustical 
characteristics of the performance space.
If raising the values for separate frequencies causes the sound to distort, you 
can use the “Master Level” (see below) to control such distortion.
 
1.
 
Press the [Function] (Exit) button, getting its indicator to light.
 
2.
 
Press the [Song] (Select -) button or [
] (Select +) button to 
display the EQUALIZER screen.
 
fig.03-151d
 
3.
 
Press the [Song] (Select -) button or [
] (Select +) button so that 
the value for the range you want to set is flashing.
 
fig.03-152d
 
4.
 
Press the [
] (Value -) button or [
] (Value +) button to 
adjust the range and the overall level.
 
Value:
-60–0–+60
 
5.
 
Press the [Function] (Exit) button so the indicator goes out.
 
Value
Description
Master 
(Master Level)
 
You can temper the distortion in the sound by lowering the level.
Raising the level too much may cause the sound to become dis-
torted.
 
L (Low)
 
Low-frequency range. 
This is the range of frequencies for instruments like drums, bass, 
organ, guitar and strings.
 
M (Middle)
 
Midrange. 
This is the range of frequencies where most instrument sounds 
are concentrated.
 
H (High)
 
High-frequency range. 
These frequencies add brilliance to the sound.
You can save this setting in 
the RG-3M’s memory using 
the Memory Backup function 
(p. 75).
RG-3M_e3.book 62 ページ 2008年3月25日 火曜日 午前10時1分