Roland RG-3M Manuel D’Utilisation
83
Chapter 5. User Program Registration
Calling Up Saved User Programs
You can easily call up User Programs.
1.
Hold down the [Function] (Exit) button and press the [
]
(Value -) button or [
] (Value +) button to select the User
Program you want to call up.
fig.05-070d
The display changes to indicate the registered buttons and other
performance settings. The tone name registered in the User Program
appears in the lower row of the screen.
performance settings. The tone name registered in the User Program
appears in the lower row of the screen.
Restoring the Standard Performance Settings
(Settings in Effect When the Power is Turned On)
(Settings in Effect When the Power is Turned On)
After you have called up User Programs, you can use the following
procedure to restore the performance settings that are selected when the
power is turned on.
procedure to restore the performance settings that are selected when the
power is turned on.
1.
Press the [Function] (Exit) button so the indicator goes out.
2.
Hold down the [Function] (Exit) button and press the [
]
(Value -) button to select “User Program 01.”
fig.05-070d
3.
Hold down the [Function] (Exit) button and press the [
]
(Value -) button once again.
The user program settings are turned off.
You can use the Pedal as a
dedicated switch for
selecting User Programs in
order.
dedicated switch for
selecting User Programs in
order.
For more details, refer to
“Using the Pedal to Switch
User Programs” (p. 90).
“Using the Pedal to Switch
User Programs” (p. 90).
RG-3M_e3.book 83 ページ ２００８年３月２５日 火曜日 午前１０時１分