Roland SH-01 Manuel D’Utilisation

n

Status

Data byte                   

Status

F0H

iiH, ddH, ......,eeH

F7H

F0H:

System Exclusive Message status

ii = ID number:

An ID number (manufacturer ID) to indicate the manufacturer 
whose Exclusive message this is. Roland’s manufacturer ID 
is 41H. ID numbers 7EH and 7FH are extensions of the MIDI 
standard; Universal Non-realtime Messages (7EH) and Universal 
Realtime Messages (7FH).

dd,...,ee = data:

00H - 7FH (0 - 127)

F7H:

EOX (End Of Exclusive)

Universal Non-realtime System Exclusive Messages and Data Set 1 (DT1) are the only 
System Exclusive messages transmitted by the SH-01.

l

m

Receiving Identity Request Message, the SH-01 send this message.

Status

Data byte                                                                   Status

F0H

7EH, dev, 06H, 02H, 41H, 41H, 02H, 00H, 
00H, 00H, 03H, 00H, 00H

F7H

Byte

Explanation                                                                            

F0H

Exclusive status

7EH

ID number (Universal Non-realtime Message)

dev

Device ID (dev: 10H - 1FH)

06H

Sub ID#1 (General Information)

02H

Sub ID#2 (Identity Reply)

41H

ID number (Roland)

41H 02H

Device family code

00H 00H

Device family number code

00H 03H 00H 00H

Software revision level

F7H

EOX (End of Exclusive)

l

m

Status

Data byte                                                            Status

F0H

41H, dev, 00H, 00H, 41H, 12H, aaH, bbH, 
ccH, ddH, eeH, ... ffH, sum

F7H

Byte

Explanation                                                                                                      

F0H

Exclusive status

41H

ID number (Roland)

dev

Device ID (dev: 00H - 1FH, 7FH)

00H

Model ID #1 (SH-01)

00H

Model ID #2 (SH-01)

41H

Model ID #3 (SH-01)

12H

Command ID (DT1)

aaH

Address MSB: upper byte of the starting address of the data 

to be sent

bbH

Address:

upper middle byte of the starting address of 
the data to be sent

ccH

Address:

lower middle byte of the starting address of the 
data to be sent

ddH

Address LSB:

lower byte of the starting address of the data to 
be sent.

eeH

Data:

the actual data to be sent. Multiple bytes of 
data are transmitted in order starting from the 
address.

 :

 :

ffH

Data

sum

Checksum

F7H

EOX (End Of Exclusive)

*  The amount of data that can be transmitted at one time depends on the type of 

data, and data will be transmitted from the specified starting address and size. Refer 
to the address and size given in “Parameter Address Map” (p. 8).

*  Data larger than 256 bytes will be divided into packets of 256 bytes or less, and each 

packet will be sent at an interval of about 20 ms.