Yamaha MOTIF XS7 Manuel D’Utilisation

From this display, you can set the EQ parameters for each 
Element. 

Determines the EQ Type. The number of parameters and 
values available differs depending on the selected EQ 
type. 

2 Band, PEQ

See below. 

Boost 6, Boost 12, Boost 18

Boosts the entire band of the selected Element by +6dB, +12dB, and 
+18dB respectively. 

thru

If you select this, the equalizers are bypassed and the entire signal is 
unaffected. 

This is a “shelving” equalizer, which combines separate 
high and low frequency bands.

Determines the standard frequency of the lower EQ band. 

Settings: 50.1 Hz – 2.00 kHz

Determines the standard frequency of the higher EQ band. 

Settings: 503.8 Hz – 10.1 kHz

Determines the amount by which signals below the Low 
Frequency (

2) will be boosted/attenuated. 

Settings: -12.00 dB – +0.00 dB – +12.00 dB

Determines the amount by which signals above the High 
Frequency (

3) will be boosted/attenuated. 

Settings: -12.00 dB – +0.00 dB – +12.00 dB

The Parametric EQ for the single band is used to attenuate 
or boost signal levels (gain) around the Frequency. This 
type features 32 different “Q” settings, which determine the 
frequency band width of the equalizer.

Determines the center frequency. 

Settings: 139.7 Hz – 12.9 kHz

Determines the amount by which signals below the Low 
Frequency (

2) will be boosted/attenuated. 

Settings: -12.00 dB – +0.00 dB – +12.00 dB

Determines the Q (bandwidth) for the band. The lower the 
setting, the greater the bandwidth. The higher the setting, 
the smaller the bandwidth. 

Settings: 0.7 – 10.3

 EQ Type

 EQ Type