Yamaha MOTIF XS7 Manuel D’Utilisation

When the Trigger Mode (

8) is set to “manual,” pressing 

this button starts Sampling immediately. 

During Sampling, a graphic representation of the recorded 
audio appears in the display. 

Press this button to stop Sampling. When Sampling is 
complete, the FINISHED display appears. 

When the [SF1] Confirm is turned on before Sampling 
starts, the FINISHED display below appears as soon as 

Sampling is finished. From this display, you can hear and 
confirm the Sample by pressing the [SF1] Audition button. 
If you are satisfied with the sound, press the [ENTER] 
button to fix the Sampling result as Sample data. If you are 
not satisfied with the Sampling result, press the [EXIT] 
button then try again. 
When [SF1] Confirm is turned off before Sampling starts, 
the Sampling operation will automatically fix the Sample 
data and return to the Setup display (page 164). 

You can hear the recorded Sample by holding this button. 
This lets you check whether the Sampling has been 
executed appropriately or not. 

n When [SF1] Confirm (page 166) is turned off before the 

Sampling starts, the Sampling operation will automatically fix 
the Sample data and return to the Setup display (page 164). 
Please note that the instrument returns to the STANDBY 
display after Sampling is finished when Record Next is turned 
on in the Setup display. 

➞ [EDIT]

The Sampling Edit mode gives you comprehensive, detailed controls for editing the recorded Sample and changing the 
Sample settings. Press the [EDIT] button from the Sampling Main display to call up the Sampling Edit display. Press the 
[EXIT] button to go back to the Sampling Main display. 

Select a Waveform and Key Bank to which the Sample 
to be edited is assigned. 

Set the desired parameter in each display. 

Repeat steps 4 and 5 as desired.