Yamaha MOTIF XS7 Manuel D’Utilisation

Page de 320
Multi-timbral Tone Generator Settings for Song/Pattern Playback (Mixing mode)
MOTIF XS Owner’s Manual
240
V
oice mode
Song mode
P
attern mode
Mixing mode
Master mode
Utility mode
File mode
P
erf
ormance
 mode
Sampling
 mode 1
Sampling
 mode 2
Ref
erence
Useful functions in the Mixing Voice 
Edit mode
This is the same as in the Voice Element Edit mode 
(page 97). 
This is the same as in the Voice Element Edit mode 
(page 97).
This is the same as in the Voice Element Edit mode 
(page 97).
This is the same as in the Voice Element Edit mode 
(page 97).
This window indicates the information of the current Mixing 
Voice. You can call up this display by pressing the [SF6] 
INFO button in the Mixing Voice Edit mode. Keep in mind 
that the Information window can be called up only when 
the [SF6] tab menu indicates “INFO.” 
Press any of the panel buttons to return to the original 
status.
Storing the created Mixing Voice
[MIXING] 
 [F6] Vce Edit  [STORE]
1
When the [E] indicator is shown on the display 
in the Mixing Voice Edit mode, press the 
[STORE] button. 
The Mixing Voice Store window appears. 
2
Specify the destination for storing the Mixing 
Voice. 
Select a Mixing Voice (MIXV) number as destination by 
using the data dial, [INC/YES] and [DEC/NO] buttons. 
You can store the Voice edited in the Mixing Voice Edit 
mode also as a User Normal Voice by setting the Voice 
Bank to “USR1,” “USR2,” and “USR3.” 
3
Press the [ENTER] button. 
The display prompts you for confirmation. To cancel the 
Store operation, press the [DEC/NO] button. 
4
Press the [INC/YES] button to execute the 
Store operation. 
After the Mixing Voice has been stored, a “Completed” 
message appears and operation returns to the original 
display. 
When you execute the Store operation, the settings for the 
destination memory will be overwritten. Important data should 
always be backed up to a separate USB storage device or to a 
computer connected via network to the MOTIF XS. For detailed 
instructions on saving, see page 278. 
Mixing Voice Job
[MIXING] 
 [F6] Vce Edit  [JOB]
The Mixing Voice Job mode provides convenient tools for 
organizing your created Mixing Voices.
1
Press the [JOB] button in the Mixing Voice Edit 
mode to enter the Mixing Voice Job mode. 
2
Call up the desired Mixing Voice Job by 
pressing the appropriate button ([F2] – [F4]). 
3
Set the parameters for executing the Job. 
Move the cursor to the desired parameter, then set the 
value. 
4
Press the [ENTER] button. (The display 
prompts you for confirmation.) 
To cancel the Job, press the [DEC/NO] button. 
5
Press the [INC/YES] button to execute the Job. 
After the Job has been completed, a “Completed” 
message appears and operation returns to the original 
display. 
Even if a Job operation has been completed, selecting a 
different Voice or turning the power off without storing will 
erase the Voice data. Make sure to store the Voice data to 
internal memory by pressing the [STORE] button before 
selecting a different Voice or turning the power off. 
6
Press the [EXIT] button to return to the Mixing 
Voice Edit mode. 
Switching an Element on/off
Soloing an Element to be edited
The [E] Indicator
Compare function
Mixing Voice Information—[SF6] INFO
Mixing Voice Job Procedure
CAUTION
CAUTION