Behringer EG2080-RW/BK Manuel D’Utilisation
19
EUROGRAND EG2080-
RW/BK
Function:
E6
Value:
0
x20
Description:
1
x20
: Volume of muted track (default setting:
5
)
0
:
Muted tracks are not audible
6.5.6 Editing the music sequencer settings
The following paragraphs explain how to edit the playback
settings of recordings made with the music sequencer.
settings of recordings made with the music sequencer.
The following settings can be edited separately for each of the
two tracks:
two tracks:
V
Sound (see chapter 3.4)
V
Room effect intensity (see chapter 5.2.2)
V
Modulation effect intensity (see chapter 5.2.3)
V
Layered sounds (see chapters 5.1 and 6.3)
The following global settings can be made for the whole music
piece:
piece:
V
Tempo (see chapter 6.4)
V
Meter (see chapter 6.4)
V
Type of room effect (see chapter 5.2.2)
V
Type of modulation effect (see chapter 5.2.3)
1) Press the REC button in the SONG section to enter record
mode. The REC LED above the TRACK 1 or TRACK 2 buttons
lights up and the dots in the display start flashing in the
rhythm of the selected metronome tempo, thus indicating the
beat.
lights up and the dots in the display start flashing in the
rhythm of the selected metronome tempo, thus indicating the
beat.
Be sure not to press the START/STOP button during
the following steps. Otherwise, a new recording
would be made on the selected track erasing all
the data recorded before.
the following steps. Otherwise, a new recording
would be made on the selected track erasing all
the data recorded before.
2) Use the TRACK button to select the track whose settings
you wish to edit. If you want to edit global settings (e.g.
tempo, measure, etc.) you can select either one of the two
tracks.
tempo, measure, etc.) you can select either one of the two
tracks.
.
3) Edit the settings as described in the chapters mentioned
above.
4) If necessary, repeat step 2 for the second track.
5) Press the REC button to quit record mode.
The changes made have now been stored in the music sequencer.
When you play back the music piece, the new settings will be
effective. All previous settings are deleted.
When you play back the music piece, the new settings will be
effective. All previous settings are deleted.
6.5.7 Sync start
You can set the music sequencer playback-ready, so that it will
start playback as soon as you play a key on the keyboard. This
function can be very helpful when the music sequencer is used
as an „accompanist“. The function is also available in DEMO
mode.
start playback as soon as you play a key on the keyboard. This
function can be very helpful when the music sequencer is used
as an „accompanist“. The function is also available in DEMO
mode.
1) Make sure that the playback tracks are active (PLAY LED
above the corresponding TRACK button lights up green). If
necessary, activate the tracks by pressing their TRACK
buttons in the SONG section.
necessary, activate the tracks by pressing their TRACK
buttons in the SONG section.
2) Press and hold one of the active TRACK buttons, then press
the START/STOP button in the SONG section.
.
+
A dot in the lower right-hand corner of the display starts flashing
in the tempo of the metronome, thus signaling that the instrument
is set to sync start mode. The sequencer starts playback as
soon as you play a key on the keyboard.
in the tempo of the metronome, thus signaling that the instrument
is set to sync start mode. The sequencer starts playback as
soon as you play a key on the keyboard.
If you want to quit sync start mode, simply repeat
step 2.
step 2.
6.5.8 Starting the music sequencer with the foot
pedal
This function allows you to reprogram the left soft pedal, so that
it can be used to start/stop the music sequencer. This is useful
when you are playing a music piece live and want to start a
sequencer accompaniment at a later point during the piece. When
the pedal has been set accordingly, you can also use it to start/
stop playback in DEMO mode.
it can be used to start/stop the music sequencer. This is useful
when you are playing a music piece live and want to start a
sequencer accompaniment at a later point during the piece. When
the pedal has been set accordingly, you can also use it to start/
stop playback in DEMO mode.
Please enter EDIT mode (see chapter 6.1) and select
the following function.
the following function.
Function:
E4.1
Value:
1,
2
Description:
1
:
Soft pedal function (default setting)
2
:
Music sequencer START/STOP
6.6 System settings
The EG2080 provides several setting options to control the global
functions of the instrument. Please read below which options
are available and how you can edit their settings.
functions of the instrument. Please read below which options
are available and how you can edit their settings.
6. ADVANCED OPERATION