Kawai CN22 Manuel D’Utilisation

Page

35

APPENDICES

3. Place the piano on the front half of the stand so that the metal 

fi tting holes are seen when viewed from the top. Slide the 
piano backward while holding it with one hand so that it does 
not incline and fall from the stand. The hooks on the piano are 
then engaged with the metal fi ttings on the Side Panels. Pay 
attention so that hands or fi ngers are not caught between the 
stand and piano.

  Fasten the piano and the stand with four bolts (with plain 

washers and spring washers)(G).

  First, loosely tighten the bolts to adjust the unit position in 

order to make sure that all four bolts can be inserted straight.  
Then, tighten the bolts.

 

 Make sure that the bolts are tightened until the spring washers 
collapse.

4. Insert the pedal connection cord that comes from Pedal Board 

(C) into the piano’s pedal jack and fasten with cord clamps.

5. Fix the headphone hook to the location marked with red ink by 

using two tapping screws provided in the same plastic bag.

6. Turn the Adjuster (installed on the bottom of C) until it touches 

the fl oor to support the pedal board.

Caution

y Ensure that the CN22 digital piano is correctly secured to the stand by using the bolts included. 

Failing to do so may result in the unit falling from the stand, causing damage or personal injury.

Caution

y  The pedal board may break if the adjuster 

is not touching the fl oor correctly.  When 

moving the CN22 digital piano, ensure that 

the unit is lifted clearly from the fl oor and 

not dragged.

Hand or Finger 
catching hazard 

(G)

backside of the unit

Pedal jack

Cord
clamp

Pedal
cord
connector
Locking
tab

Red mark

Adjuster

Pedal board

Floor

CN22_EN.indd   35

2008/10/01   9:25:29