Denon DN-MC6000 Manuel D’Utilisation

13

When the DENON DJ ASIO driver’s “ASIO Control Panel” is called out from the host application, the
DENON DJ ASIO driver displays the ASIO control panel.

q

w

e

r

t

y

u

q

This window is used for automatically displaying 
all connected DENON DJ devices in a list.
(Example: DN-MC6000)
• When you select a device you want to set 

from this list, the current settings of the 
selected device appear in a window 

u

 

(“Device Description”).

• If you double-click a device, the ASIO device 

status is switched from “Enable” to “Disable” 
or vice versa.

• ASIO device status

Enable  :  A check mark appears on the left side 

of  a  device  name  and  the  name  is 
highlighted (bold).

Disable  :  The  check  mark  on  the  left  side  of 

a  device  name  is  removed  and  the 
device name is displayed in lightface.

• You can select one device at a time.
• You can set multiple devices to enable at the 

same time.

w

This  button  is  used  for  switching  a  device 
selected in 

q

 to enable or disable as an ASIO 

device.

You can also switch the status of an ASIO device by 
double-clicking the device name.

e

Use this slider to adjust the buffer size.

• The range of values is 88 to 2048 (sample units), 

in steps of 1 ms.

• When you set multiple devices to enable as ASIO 

devices, the same setting values apply to all ASIO 
devices.

r

OK:
Use this button to close the ASIO control panel, 
reflecting the changes to the settings.
Cancel:
Use this button to close the ASIO control panel 
without reflecting the changes to the settings.

t

Selected bit resolution is displayed.

y

The sampling rate selection is displayed here.
The  frequencies  with  which  the  DENON  DJ 
ASIO driver is compatible are as follows:
• 44.1kHz/48kHz/96kHz

u

This  is  the  area  in  which  information  for  the 
device selected in the device information list is 
displayed.
The following are displayed:
• Device name
• Unit number
• Software version
• Audio input channels
• Audio output channels
• Sampling frequency
• Max bit resolution
• Audio buffer size

If the device’s information cannot be acquired, “–” 
(hyphens) are displayed for all items.