Roland HD-1 Manuel D’Utilisation
18
Please remember that the pads designed for the HD-1 will not fit on
any other brand of stand.
any other brand of stand.
1.
Unplug the tom and cymbal cables.
fig.replace-tam3-j
2.
Use a drum key to remove bolt
securing the cymbal rod from
the pipe.
securing the cymbal rod from
the pipe.
fig.replace-tam1-j
3.
Remove the plastic end-cap
from the pipe.
from the pipe.
* Do not insert your finger into the
pipe while the cap is removed.
fig.replace-tam2-j
4.
Use a drum key to loosen the
bolt securing the pad to the
pipe.
bolt securing the pad to the
pipe.
fig.replace-tam4-j
5.
Remove the tom pad from the
pipe.
pipe.
This is basically a reverse operation of the detaching process. But
when re-fitting the pads to the pipes, be careful to align the grooves
in the pipe with the triangular protrusions of the pad. The pads can
be fitted to three pitch(angle) positions.
when re-fitting the pads to the pipes, be careful to align the grooves
in the pipe with the triangular protrusions of the pad. The pads can
be fitted to three pitch(angle) positions.
Tom1, Tom2
Tom3
fig.tom1-2
Detaching/Mounting a Tom Pad
Detaching a Tom Pad
end-cap
Mounting a Tom Pad
HD-1_r_e.book 18 ページ ２００７年３月２８日 水曜日 午後６時５８分