Roland TD-9 Manuel D’Utilisation
58
Other settings (Utility)
Data you’ve saved on a USB memory key can be loaded back
into the TD-9. This is called “Load.”
into the TD-9. This is called “Load.”
Loading backup data
1. In the “USB UTILITY” screen, press [F2] (LOAD).
The “UTILITY USB LOAD” screen appears.
2. Press [F1] (BACKUP).
The “LOAD BACKUP DATA” screen appears.
3. Use CURSOR [
] [
] to move the cursor to “Load
Data.”
4. Use [+/-] or [VALUE] to select the specific data that
will be loaded into the TD-9.
ALL: All
settings
KIT: Drum
kits
SETUP: Setup settings
5. Use CURSOR [
] [
] to move the cursor to
“Number.”
6. Use [+/-] or [VALUE] to select the specific data that
will be loaded into the TD-9.
7. Press [F3] (LOAD).
A confirmation screen appears.
8. To load the data, press [F3] (EXEC).
If you decide to cancel, press [F1] (CANCEL).
When data has been loaded, the display says
“Completed” and you’ll return to the “DRUM KIT” screen.
When data has been loaded, the display says
“Completed” and you’ll return to the “DRUM KIT” screen.
Loading Quick Rec data
1. In the “USB UTILITY” screen, press [F2] (LOAD).
The “UTILITY USB LOAD” screen appears.
2. Press [F2] (Q REC).
The “LOAD QUICK REC DATA” screen appears.
3. Use CURSOR [
] [
] to move the cursor
“Number.”
4. Use [+/-] or [VALUE] to select the specific data that
will be loaded into the TD-9.
5. Press [F3] (LOAD).
A confirmation screen appears.
6. To load the data, press [F3] (EXEC).
If you decide to cancel, press [F1] (CANCEL).
When data has been loaded, the display says
“Completed” and you’ll return to the “DRUM KIT” screen.
When data has been loaded, the display says
“Completed” and you’ll return to the “DRUM KIT” screen.
Loading data from a USB memory key back into the TD-9 (LOAD)
TD-9_e.book 58 ページ 2008年1月23日 水曜日 午後4時24分