M-AUDIO Torq 1.5 Manuel D’Utilisation

Torq 1.5 User Guide 

Chapter 1          

84

Torq 1.5 User Guide 

Chapter 15          

84

This option allows you to switch between Internal and External Mixer mode.

 

 

Internal Mixer mode: This is the default setting where Torq’s on-screen mixer is used to blend the signals from 
the Decks.

 

 

External Mixer mode: This will bypass the Torq mixer and route each Deck to its own output pair on your audio 
interface. These individual stereo outputs can then be connected to your favorite DJ mixer in the same manner as 
two turntables or CDJ’s. You’ll then mix and cue your tracks using your DJ mixer instead of Torq’s Mixer.

< 

 

 

 Once you have selected an audio interface and selected a mixer mode, you can assign the outputs of Torq to the 
channels of the selected audio interface. The assignment options will differ depending on which mixer mode is 
active:

»

 

 

      • 

 Master Output — Click to access the drop-down menu and select the stereo output pair for the 
Torq Master Output. This is the output you will connect to the speakers.

 

 

      • 

 Cue Output — Click to access the drop-down menu and select the stereo output pair for cueing 
(or pre-listening) to the output of a Deck. This is the output for the headphones.

 

 

      • 

 Line Input A — Click to access the drop-down menu and select the stereo input pair for use as 
the Line Input for Channel A of the Mixer.

 

 

      • 

 Line Input B — Click to access the drop-down menu and select the stereo input pair for use as 
the Line Input for Channel B of the Mixer.

 

 

      • 

 Control Input A — Click to access the drop-down menu and select the stereo input to which 
your left turntable or CD player is connected. This is also the Control Input used by AMPutate 
mode.

 

 

      • 

 Control Input B — Click to access the drop-down menu and select the stereo input to which 
your right turntable or CD player is connected.

»

 

 

      • 

 Deck A Output — Click to access the drop-down menu and select the stereo output for Deck A. 
This signal will not be processed by Torq’s Mixer—it will be fed into a stereo channel of an external 
DJ mixer.

 

 

      • 

 Deck B Output — Click to access the drop-down menu and select the stereo output for Deck B. 
This signal will not be processed by Torq’s Mixer—it will be fed into a stereo channel of an external 
DJ mixer.

 

 

      • 

 Sampler — Click to access the drop-down menu and select the stereo output for Torq’s Sampler.

 

 

      • 

 Line Input A — Click to access the drop-down menu and select the stereo input pair for use as 
the Line Input for Channel A of the Mixer.

 

 

      • 

 Line Input B — Click to access the drop-down menu and select the stereo input pair for use as 
the Line Input for Channel B of the Mixer.

 

 

      • 

 Control Input A — Click to access the drop-down menu and select the stereo input to which 
your left turntable or CD player is connected. This is also the Control Input used by AMPutate 
mode.

 

 

      • 

 Control Input B — Click to access the drop-down menu and select the stereo input to which 
your right turntable or CD player is connected.

           ✓