La Crosse Technology 308-1414M Manuel D’Utilisation
Model: 308-1414M www.lacrossetechnology.com/support Page | 2
Quick Setup
Step 1: Insert the 5 volt AC cord (included) into the wall outlet then into the weather
station.
Step 2: Insert the 3 new AAA Alkaline batteries (not included) into the weather station.
Step 2: Insert the 3 new AAA Alkaline batteries (not included) into the weather station.
Observe the correct polarity.
Step 3: Insert the 2 new AA batteries (not included) into the TX141TH-BV2 remote
sensor. Observe the correct polarity. The red LED will flash during transmission.
sensor. Observe the correct polarity. The red LED will flash during transmission.
Restart: If the remote temperature is not displayed after 3 minutes, unplug the AC
adapter and remove batteries from the weather station & sensor and press any button
20 times. After 15 minutes return to Step 1 above.
Table of Contents