Toro TMC-424E Manuel D’Utilisation

1. Turn Function Dial to 

Manual Programs .

2. Set the Program Switch to select pro-

gram A, B, C, or D.

3. Press the

button to start the program

watering cycle. The program identifier

will begin flashing and Water On icon

will be displayed.

4. To select additional programs, repeat

steps 2 and 3.

5. Turn the Function Dial to RUN

.

• The operating program identifier, station

number(s), remaining station run time

and icon will begin alternating with 

the current time of day.

• The programs will operate in the order

selected, either sequentially or 

concurrently as determined by the

Stack/Overlap option selection. 

• Automatic mode will resume when 

the manual operation is finished. 

• To turn off an active station and start

the next station in sequence, position

Program Switch (if needed) to select

the program, then press the

button. 

• To end manual operation at any time,

turn the Function Dial to OFF

.

When the display to stops flashing, turn

the Function Dial to RUN .

1. Set the Program Switch to select 

program A, B, C, or D.

2. Turn Function Dial to Station Times

.

3. Press the

or

button to select 

the station number. The corresponding

station output terminal will be shown 

on the display as a solid circle.