FoneGEAR 06266 Manuel D’Utilisation

Page de 4
Use of syncCABLE 
 
foneGEAR syncCABLE is designed to act as a “Plug and Play” device. All you 
need to do is plug it into your phone and your computer, and you will then be 
able to click, drag and drop files from your computer drives to the memory 
storage space in your cellular phone.   
 
To use syncCABLE, grasp both ends of the cable and pull smoothly and gently 
with equal force on both ends to extend the cable.  syncCABLE provides a 34” 
retractable cord, enable you to find a convenient distance between your phone 
and your computer.   
 
After extending syncCABLE, plug the USB charger end into your computer’s 
USB port, and then plug the phone charger end of syncCABLE into your phone’s 
charging port.  At this point, a variety of scenarios may occur, depending on your 
phone model and software, whether you have a memory card installed in your 
phone, and your computer type and operating system.  Due to the thousands of 
variations in phone/computer/software combinations, it would be impossible for 
foneGEAR to outline every scenario, but these are among the most common: 
 
a.  Your computer displays a dialogue bubble indicating that it has 
recognized the phone as an attached mass-storage device or disk 
drive.  
 At this point the computer may open a folder showing the location 
of your phone or your phone’s memory card.  At this point you may “drag 
and drop” files directly into this folder, and syncCABLE will automatically 
transfer them to your phone.   
 
b.  Your computer displays a dialogue bubble indicating that it has 
recognized the phone as an attached mass-storage device or disk 
drive, but does not open a new folder showing the device. 
At this 
point, navigate to your computer’s “My Computer” or folder and see if your 
phone device is listed among the drives on your computer.  If so, you may 
“drag and drop” files directly into this folder, and syncCABLE will 
automatically transfer them to your phone. 
 
c.  Your computer does not display a dialogue bubble or open a new 
folder showing the device.   Navigate to your computer’s “My Computer” 
or folder and see if your phone device is listed among the drives on your 
computer.  If so, you may “drag and drop” files directly into this folder, and 
syncCABLE will automatically transfer them to your phone. 
 
d.  Your computer does not display a dialogue bubble or open a new 
folder showing the device, and it is not displayed in your computer’s 
“My Computer” folder.
   You may need a driver or other phone or 
computer software from your cellular carrier or phone manufacturer for