Grizzly G0758 Manuel D’Utilisation
Model G0758 (Mfd. Since 2/14)
-13-
Figure 6. Inventory included with machine.
K
A
C
D
E
G
B
I
J
L
M
F
H
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Inventory
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Inventory (Figure 6)
Qty
A. Handwheel Handles w/Screws ................... 3
B. Bottle for Oil ............................................... 1
C. Toolbox ....................................................... 1
D. Drill Chuck Arbor R-8 x B-16 ...................... 1
E. Standard Screwdriver ................................. 1
F. Phillips Screwdriver .................................... 1
G. Spindle Pin ................................................. 1
H. Open-End Wrench 8/10mm ........................ 1
I. Open-End Wrench 12/14mm ...................... 1
J. Open-End Wrench 17/19mm ...................... 1
K. Drill Chuck 3–16mm w/Chuck Key ............. 1
L. T-Bolt M8-1.25 x 55 Assemblies ................. 2
M. Hex Wrenches 2.5, 3, 4, 5, 6mm ......1 Each