Zebra Technologies RP Manuel D’Utilisation
19
UMAN-Charge
The condition cycle for a fully charged battery is approxi-
mately 90 minutes.
mately 90 minutes.
If the “Charge OK” indicator blinks, disconnect the battery
pack and wait until all the lights except the “Power “ light go
out. Reconnect the battery and repeat step 3.
out. Reconnect the battery and repeat step 3.
UC Series Charger Models
Base Part Number*
Used on
Charge Method
CC12708-1x
MP5020/22
Cable
CC12708-2x
MP5030
Cable
CC12708-3x
MP5044
Cable
CC12708-5x
RP3
Cable to Printer
CC12891-1x
RP3
Battery Drop-In
CC12708-7x
Encore 2,3, Cameo
†
Cable
CC12708-8x
Encore 4
†
Cable
* Last digit in part number Indicates model:
-X
0
= North American model
-X
1
= U.K. model
-X
2
= Continental European model
-X
3
= Australian model
† These models use NiMH type battery packs. Conditioning is not necessary
once batteries have been cycled several times. A NiMH battery is” cycled” by
fully charging it, then fully discharging it through normal use. The “Condition”
cycle on UC series chargers can also be used for this purpose.
once batteries have been cycled several times. A NiMH battery is” cycled” by
fully charging it, then fully discharging it through normal use. The “Condition”
cycle on UC series chargers can also be used for this purpose.