Harbor Freight Tools 98524 Manuel D’Utilisation

SKU 98524

For technical questions, please call 1-800-444-3353.

Page 4

Power tool use and care

Do not force the power tool. Use

the correct power tool for your ap-

plication. The correct power tool will

do the job better and safer at the rate

for which it was designed.
Do not use the power tool if the

switch does not turn it on and off.

Any power tool that cannot be con-

trolled with the switch is dangerous

and must be repaired.
Disconnect the plug from the

power source and/or the battery

pack from the power tool before

making any adjustments, chang-

ing accessories, or storing power

tools. Such preventive safety mea-

sures reduce the risk of starting the

power tool accidentally.
Store idle power tools out of the

reach of children and do not allow

persons unfamiliar with the power

tool or these instructions to oper-

ate the power tool. Power tools are

dangerous in the hands of untrained

users.
maintain power tools. Check for

misalignment or binding of moving

parts, breakage of parts and any

other condition that may affect the

power tool’s operation. If dam-

aged, have the power tool repaired

before use. Many accidents are

caused by poorly maintained power

tools.
Keep cutting tools sharp and

clean. Properly maintained cutting

tools with sharp cutting edges are

less likely to bind and are easier to

control.
Use the power tool, accessories

and tool bits etc. in accordance

with these instructions, taking into

account the working conditions

and the work to be performed. Use

of the power tool for operations differ-

ent from those intended could result

in a hazardous situation.
Service

Have your power tool serviced by

a qualified repair person using

only identical replacement parts.

This will ensure that the safety of the

power tool is maintained.

Specific Safety Warnings

Always wear ANSI-approved safety

impact eye goggles and heavy-du-

ty work gloves when using Planer.

Using personal safety devices reduce

the risk for injury. Safety impact eye

goggles and heavy work gloves are

available from Harbor Freight Tools.

Dust mask, non skid safety shoes,

hard hat, or hearing protection must

be used for appropriate conditions.
Use a platform, or other practical

way, to support a long workpiece

as it enters the Planer. Holding the

work by hand or against your body

is unstable and may lead to loss of

control.
Avoid unintentional starting.

Make

sure you are prepared to begin work

before turning on the Planer.
Do not force the Planer.

This tool

will do the work better and safer at

the speed and capacity for which it

was designed.
Always unplug the Planer from its

electrical outlet before changing

blades or performing any inspec-

tion, maintenance, or cleaning

procedures.