Hitachi C 10FCB Manuel D’Utilisation

10

Wood, plywood, color board, soft fabric board, hard board similar materials and aluminum sash.

Make the following preparations before operating the power tool:

  1. Installation

Fig. 4

Attach the power tool to a level, horizontal work bench in accordance with Fig. 4.

Select 5/16" (8 mm) diameter bolts suitable in length for the thickness of the work bench.

Bolt length should be at least 1" (25 mm) plus the thickness of the work bench.

For example, use 2" (50 mm) or larger bolts for a 1" (25 mm) thick work bench.

  2. Releasing the locking pin

When the power tool is prepared for shipping, its main parts are

secured by a locking pin.

Move the handle (see Fig. 1) slightly so that the locking pin can be

disengaged.

During transport, lock the locking pin into the gear case.

  3. Installing the dust bag, holder and vises. (The holder is optinal accessory.)

Attach the dust bag, holder, and vises as indicated in Fig. 1.

5/16" (8 mm) Bolt

Work Bench

5/16" (8 mm) Nut

Base

Fig. 5

Locking

Pin

1" (25 mm) Thick Bench

12-3/4" (324 mm)

5-5/16" (160 mm)

11/32"

(9 mm)

3 Holes

13-3/8" (340 mm)