Grizzly H8361 Manuel D’Utilisation
H8361/H8362 (Mfg. 05/09+)
-3-
To reduce risk of serious injury when using
this bench:
Do not apply an unbalanced load that
•
could result in the workbench tipping
over.
Do not stand or climb on the
•
workbench.
Avoid applying excessive force when
•
using workbench vise and dogs. Be sure
workpiece is securely locked in place.
Always wear eye protection.
•
Keep your work area clean, uncluttered
•
and well lit. Do not work on or place
workbench legs on floor surfaces that
are slippery from sawdust, oil, water, or
wax.
Keep visitors and children at a safe
•
distance away from the work area,
especially when you are operating a
power tool.
Do not wear loose clothing, gloves,
•
neckties, or jewelry. Secure long hair,
button all long sleeve shirts, and wear
non-slip footwear.
4. using an
1
⁄
8
" drill bit, drill 1
7
⁄
16
"
deep holes
through the vise plate mounting holes and
into the wood block.
into the wood block.
Maintenance
To avoid damaging it, do not store the workbench
outside, or in an overly damp or extremely dry
location.
outside, or in an overly damp or extremely dry
location.
If you need help with your new item, call our Tech
Support at: (570) 546-9663.
Support at: (570) 546-9663.
5. Secure the vise plate to the wood block with
two #5 x 1
7
⁄
16
" wood screws (
Figure 6).
6. Place a cotter pin in the end of the threaded
rod, bending it tightly around the shaft to
keep it from threading out of the vise support
block.
keep it from threading out of the vise support
block.