Tektronix TDS460A Manuel D’Utilisation
Command Descriptions
TDS Family Oscilloscope Programmer Manual
2–187
LIMIT:TEMPLate:SOUrce CH2
specifies that the template waveform for limit tests is the waveform currently
acquired using channel 2.
specifies that the template waveform for limit tests is the waveform currently
acquired using channel 2.
LIMIT:TEMPLate:SOUrce?
might return
might return
MATH3, specifying that the template waveform for limit tests is the
waveform currently stored as the MATH3 waveform.
LIMit:TEMPLate:TOLerance:HORizontal
Sets or queries the amount, in units of horizontal divisions, by which the source
waveform is varied horizontally when creating the destination waveform.
waveform is varied horizontally when creating the destination waveform.
Limit Test
LIMit:COMPARE:CH<x>
LIMit:TEMPLate:TOLerance:HORizontal <NR3>
LIMit:TEMPLate:TOLerance:HORizontal?
LIMit
:
TEMPLate
TOLerance
:
HORizontal
:
<NR3>
?
<Space>
<NR3> is the amount, in horizontal divisions, by which the current waveform is
allowed to deviate from the template waveform without exceeding the limits set
in the limit test. The range is 0 to 5 divisions.
allowed to deviate from the template waveform without exceeding the limits set
in the limit test. The range is 0 to 5 divisions.
LIMIT:TEMPLate:TOLerance:HORizontal 1.0
specifies that the current waveform is deemed to be close enough to the template
waveform if it is within
specifies that the current waveform is deemed to be close enough to the template
waveform if it is within
±
1.0 horizontal division.
LIMIT:TEMPLate:TOLerance:HORizontal?
might return
might return
1.0, specifying that the current waveform is close enough to the
template waveform if it is within
±
1.0 horizontal division.
Examples
Group
Related Commands
Syntax
Arguments
Examples