Mitsubishi Electronics 60/60S Manuel D’Utilisation

1.  Setting and Display Unit Operation 

1.6  Screen Saver / Backlight OFF 

 

 

 

I-18

 

8078  Screen Saver  Set the time to turn the screen OFF. 

The screen saver will not turn ON if 0 is set. 

0 to 60 (min) 
0: Do not turn screen 

OFF. 

 
(4)  Target display units 

This screen saver function is valid with the following display units. 
(a)  9-type CRT/9.5-type EL 
(b)  7.2-type/10.4-type monochrome LCD 
(c) 10.4-type 

color 

LCD 

 

(Note1)  The display unit in (a) is valid only when the screen is turned OFF by the 

 

 

SHIFT 

 and 

   

C.B 

CAN 

 keys on 

the POSITION screen. 

(Note2)  The display units in (b) and (c) have a backlight which is turned ON/OFF.  
 

(a)  If the screen is turned OFF while keys can be operated on the EDIT screen, etc., and an 

alphanumeric, symbol or INPUT key is pressed, the first key will be handled as that for turning the 
screen ON. The key will not be input. 

(b)  If the function key, menu key, page key or system changeover key is pressed while the screen is 

OFF, the screen corresponding to the pressed key will turn ON. 

(c)  The screen will not turn ON even if the reset key is pressed. However, if the screen display request 

signal is input when the reset key is pressed, the screen will turn ON. Refer to the instruction 
manual issued by each machine maker for details. Note that whether the screen will turn ON when 
any of the machine operation board keys (other than the NC operation board keys) is pressed will 
differ according to the machine specifications. Refer to the instruction manual issued by each 
machine maker for details.  

(d) Correspondence 

of 

 

 

SHIFT 

 key. 

 

The screen will not turn ON when just the 

 

 

SHIFT 

 key is pressed.