Mitsubishi Electronics 60/60S Manuel D’Utilisation

Page de 559
6. Daily Maintenance and Periodic Inspection and Maintenance 
6.3  Replacement Methods 
 
 
 
III-41
 
(b)  For a flat cable type connector with latches, open the latches in the directions of the arrows, and pull the 
connector off. 
(1) Open
(2) Pull
 
 
(c)  For a flat cable type connector without latches, hold the connector with a thumb and forefinger, and pull 
the connector off. 
(1) Hold with thumb and forefinger.
(2) Pull
 
 
(d)  For the screw fixed type connector, loosen the two fixing screws, and pull the connector off. 
(1) Loosen
(1) Loosen
(2) Pull
(2) Pull
 
 
 
Do not connect or disconnect the connection cables between each unit while the 
power is ON. 
Do not connect the cable by pulling on the cable wire.
 
CAUTION