Lexmark X363dn Manuel D’Utilisation
4
Press the arrow buttons until Eco-Mode appears, and then press
.
5
Select the setting you want, and then press
.
Submitting changes
appears.
Adjusting Power Saver using the printer control panel
1
Make sure the printer is on and Ready appears.
2
From the printer control panel, press
.
3
Press the arrow buttons until Settings appears, and then press
.
4
Press the arrow buttons until General Settings appears, and then press
.
5
Press the arrow buttons until Timeout appears, and then press
.
6
Press the arrow buttons until Power Saver appears, and then press
.
7
Press the arrow buttons to enter the number of minutes for the printer to wait before entering the Power Saver
mode. Available settings range from 1–240 minutes.
mode. Available settings range from 1–240 minutes.
8
Press
.
Submitting changes
appears.
9
Press
, and then press
until Ready appears.
Adjusting Power Saver using the Embedded Web Server
Available settings range from 1-240 minutes. The factory default setting is 30 minutes.
To increase or decrease the number of minutes before the printer enters Power Saver mode:
1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address
in the TCP/IP section.
in the TCP/IP section.
2
Click Settings, and then click General Settings.
3
Click Timeouts.
4
In the Power Saver box, increase or decrease the number of minutes you want the printer to wait before it enters
Power Saver mode.
Power Saver mode.
5
Click Submit.
Recycling
Lexmark provides collection programs and environmentally progressive approaches to recycling. For more
information, see:
information, see:
•
The Notices chapter
•
The Environmental Sustainability section of the Lexmark Web site at www.lexmark.com/environment
•
The Lexmark recycling program at www.lexmark.com/recycling
Minimizing your printer's environmental impact
38