Konica Minolta 162 Manuel D’Utilisation
3
Before making copies
3-38
bizhub 162/210
Copying onto manually fed paper by multi bypass tray
1
Position the documents.
For details refer to “Loading the document” on page 4-10.
For details refer to “Loading the document” on page 4-10.
2
Adjust the bypass tray extender and
the paper guides to fit the size of the
paper.
the paper guides to fit the size of the
paper.
3
Load the paper with the front side
facing down, lightly sliding the paper
as much as possible into the feed
slot.
facing down, lightly sliding the paper
as much as possible into the feed
slot.
The manual bypass mark (
) ap-
pears in the bottom line of the
screen.
screen.
?
Are sheets of cards or postcards loaded?
% Make sure that they are not curled (rolled).
4
Check that
YES/NO
appears in the
bottom line of the screen, and then
press the [No/C] key.
press the [No/C] key.
YES/NO
is displayed for approxi-
mately 5 seconds after paper is load-
ed into the multi bypass tray. The
paper source setup menu appears.
ed into the multi bypass tray. The
paper source setup menu appears.
5
Press the [
*] and [)] keys to select
the type of paper loaded.
Select from the following four paper
type settings.
type settings.
PLAIN
OHP
CARD
ENVELOPE
OHP
CARD
ENVELOPE
6
Press the [Yes] key.
The paper size menu appears.