Konica Minolta 210 Manuel D’Utilisation
Before making copies
3
bizhub 162/210
3-35
Copying onto manually fed paper by manual bypass
1
Position the documents.
For details refer to “Loading the document” on page 4-10.
For details refer to “Loading the document” on page 4-10.
2
Adjust the paper guides to fit the size
of the paper.
of the paper.
3
Insert one sheet of paper with the
front side facing down, lightly sliding
the paper as much as possible into
the feed slot.
front side facing down, lightly sliding
the paper as much as possible into
the feed slot.
The manual bypass mark (
) ap-
pears in the bottom line of the
screen.
screen.
?
Is a card or a postcard loaded?
% Make sure that it is not curled (rolled).
4
Press the [No/C] key.
The paper source setup menu appears.
5
Press the [
*] and [)] keys to select
the type of paper loaded.
Select from the following four paper
type settings.
type settings.
PLAIN
OHP
CARD
ENVELOPE
OHP
CARD
ENVELOPE
6
Press the [Yes] key.
The paper size menu appears.