Konica Minolta Di3010 Manuel D’Utilisation
9
Copy Paper
9-14
Di2510/Di3010/Di3510
To set a non-standard (custom) paper size
If non-standard-sized paper is loaded, it will be necessary to enter the
paper size.
paper size.
Two non-standard paper sizes can be stored for easy selection. For
details, refer to the next section.
details, refer to the next section.
Note
Where you do not wish to set the custom size, press the [Panel Reset]
key, or exceed the auto panel reset time, and this will reset to the
default settings.
Where you do not wish to set the custom size, press the [Panel Reset]
key, or exceed the auto panel reset time, and this will reset to the
default settings.
1
Touch [Paper].
2
Touch the button for the multiple
bypass tray, and then touch [Mode
Change].
bypass tray, and then touch [Mode
Change].
3
Touch [Custom Size].
The Custom Size screen appears.
4
Touch [X] and press the [C] key.
Then, using the 10-Key Pad, type in
the length of side X for the
document.
Then, using the 10-Key Pad, type in
the length of side X for the
document.