IBM TDS400 Manuel D’Utilisation
![IBM](https://files.manualsbrain.com/attachments/f70d337d03c66895b7a6fbe0e6de3554f47d7dd3/common/fit/150/50/fb4e568062ca4d0154259807170f4c71f2c7aafa861a4d9a0eb3af958af4/brand_logo.png)
164
Océ TDS400 User Manual
Maintenance of the reinforcement unit
This section covers maintenance activities for the optional reinforcement unit
of the folder, such as:
of the folder, such as:
■
Insert a new tape roll
■
Empty the waste box
■
Clean the reinforcement knives
Attention:
To avoid damage to the reinforcement unit, only use the original
reinforcement strips from Océ.
Insert a new tape roll
When the tape roll is empty while the printer is in stand-by, the following
message will appear on the display: ‘RU tape empty’. Open the reinforcement
unit and replace the empty tape roll.
message will appear on the display: ‘RU tape empty’. Open the reinforcement
unit and replace the empty tape roll.
▼
How to remove an empty tape roll
1
Open the side door of the reinforcement unit (see Figure 73).
[73] Opening the side door of the reinforcement unit
2
Turn the two guide plates away from the pin roller and lock them into their
open position (see Figure 74).
open position (see Figure 74).