Ricoh MP C1500 Manuel D’Utilisation
System Settings
78
2
To start SSL communication
A
Select [SSL] using {U} or {T}, and then press the {OK} key.
B
Select [On] using {U} or {T}, and then press the {OK} key.
Use SSL to communicate with the LDAP server.
To use SSL, the LDAP server must support SSL.
Use SSL to communicate with the LDAP server.
To use SSL, the LDAP server must support SSL.
When SSL is set to [On], the port number automatically changes to “689”.
SSL setting must be enabled on this machine. For details, consult your net-
work administrator.
SSL setting must be enabled on this machine. For details, consult your net-
work administrator.
To set authentication
A
Select [Authentication] using {U} or {T}, and then press the {OK} key.
To make a search request to the LDAP server, use the admiministrator ac-
count for authentication.
To make a search request to the LDAP server, use the admiministrator ac-
count for authentication.
B
Select [On] or [High Security] using {U} or {T}, and then press the {OK} key.
Authentication settings must comply with your server's authentication set-
tings. Check your server settings before setting this machine.
Authentication settings must comply with your server's authentication set-
tings. Check your server settings before setting this machine.
[High Security]
can be specified on Version 3.0 LDAP servers only. When [High
Security]
is selected, the administrator password is encrypted before it is sent
to the network. When [On] is selected, the password is sent without encryp-
tion.
tion.