Ricoh SP3510SF Manuel D’Utilisation
1.
Press the [Image Quality] key.
CMF139
2.
Press the [ ][ ] keys to select the desired resolution setting, and then press the [OK] key.
• Press the [Escape] key to discard the current change and return to the initial screen.
• You can change the machine's default [Resolution] setting to always scan with a specific resolution
• You can change the machine's default [Resolution] setting to always scan with a specific resolution
level.
• The "Photo" resolution is not available for Internet Faxes. Faxes will be sent using "Detail" resolution
if "Photo" resolution has been specified.
• Temporary job settings are cleared in the following cases:
• When no input is received for the period of time specified in [System Auto Reset Timer] while
the initial screen is displayed.
• When the [Clear/Stop] key is pressed while the initial screen is displayed.
• When the machine's mode is changed.
• When the power is turned off.
• When the machine's default for the same setting is changed.
• When the machine's mode is changed.
• When the power is turned off.
• When the machine's default for the same setting is changed.
• For details about [Resolution], see p.267 "Fax Transmission Settings".
• For details about [System Auto Reset Timer], see p.298 "Administrator Settings".
• For details about [System Auto Reset Timer], see p.298 "Administrator Settings".
Specifying the scanning side according to the original (Type 2 model)
If you are using the Type 2 model, you can specify the machine to scan both sides of original
automatically using the ARDF.
This section describes how to specify the scanning side according to the current original.
automatically using the ARDF.
This section describes how to specify the scanning side according to the current original.
• If the machine is in Immediate Transmission mode, this function is not available.
6. Using the Fax Function
224