Ricoh SP3510SF Manuel D’Utilisation
Item
Description
Gateway
Enter the IPv4 address of the network gateway.
Configuring the IPv6 Settings
Click the [IPv6 Configuration] tab on the network settings page to configure the IPv6 settings.
IPv6
Item
Description
IPv6
Select whether to enable or disable IPv6. You cannot disable IPv6 using
Web Image Monitor if the machine is currently in use in an IPv6
environment. In this case, use the control panel to disable [IPv6] under
network settings.
When disabled, [DHCP], [Manual Configuration Address], [Prefix Length],
and [Gateway Address] below cannot be configured.
Web Image Monitor if the machine is currently in use in an IPv6
environment. In this case, use the control panel to disable [IPv6] under
network settings.
When disabled, [DHCP], [Manual Configuration Address], [Prefix Length],
and [Gateway Address] below cannot be configured.
IPv6 Address
Item
Description
DHCP
Select whether or not the machine obtains its IPv6 address from a DHCP
server.
server.
IP Address (DHCP)
Displays the IPv6 address obtained from the DHCP server when [DHCP] is
set to [Active].
set to [Active].
Stateless Address
Displays up to four stateless auto addresses.
Gateway Address
Displays the machine's default gateway address.
Link-local Address
Displays the link local address of the machine. The link local address is an
address that is valid only inside the local network (local segment).
address that is valid only inside the local network (local segment).
Configuring the Network Settings
331