Ricoh SP3510SF Manuel D’Utilisation
Error and Status Messages on the Screen
This section describes the meaning of messages that appear on the screen and what to do when a
particular message appears.
Messages are listed in alphabetical order in the table below.
"X" indicates the parts of the messages that appear differently depending on a specific situation, such as
the paper sizes, paper types, or tray names.
particular message appears.
Messages are listed in alphabetical order in the table below.
"X" indicates the parts of the messages that appear differently depending on a specific situation, such as
the paper sizes, paper types, or tray names.
Message
Causes
Solutions
2XXX14
The machine was not able to
print the received fax, or the
machine's memory reached
capacity while receiving a fax
because the document was too
large.
print the received fax, or the
machine's memory reached
capacity while receiving a fax
because the document was too
large.
• The paper tray was empty. Load
• The tray set for [Select Paper Tray]
under [Fax Features] did not contain
A4, Letter, or Legal size paper. Load
valid size paper in the tray, and
configure the paper size settings
under [System Settings] accordingly.
A4, Letter, or Legal size paper. Load
valid size paper in the tray, and
configure the paper size settings
under [System Settings] accordingly.
• A cover or tray was open. Close the
cover or tray.
• There was a paper jam. Remove the
• A print cartridge was empty. Replace
• The received fax was too large. Ask
the sender to resend the document in
parts as several smaller individual
faxes, or to send at a lower
resolution.
parts as several smaller individual
faxes, or to send at a lower
resolution.
ADF Cover Open
Close ADF Cover
Close ADF Cover
The ARDF/ADF cover is open.
• Close the cover completely.
Error and Status Messages on the Screen
399