Ricoh SP3510SF Manuel D’Utilisation
• For details about supplies status information, see p.279 "System Settings".
• For details about user restriction settings, see p.125 "Restricting Machine Functions According to
• For details about user restriction settings, see p.125 "Restricting Machine Functions According to
Programming the LDAP Server
This section describes how to specify the LDAP server settings.
Use Web Image Monitor to program the LDAP server settings.
Operational requirements
Use Web Image Monitor to program the LDAP server settings.
Operational requirements
To program the LDAP server settings, the following requirements must be met:
• The network configuration must allow the machine to detect the presence of the LDAP server.
• When SSL is being used, TLSv1 or SSLv2 can function on the LDAP server.
• The LDAP server must be registered in the machine.
• This machine does not support LDAPv2.
• When SSL is being used, TLSv1 or SSLv2 can function on the LDAP server.
• The LDAP server must be registered in the machine.
• This machine does not support LDAPv2.
• For details about individual items related to LDAP server settings, see p.341 "Configuring the LDAP
Programming the LDAP server
This section describes how to program the LDAP server.
• Enter the user's login user name using up to 128 characters, and then enter the user's login
password using up to 128 characters.
1.
Start the Web browser, and access the machine by entering its IP address.
11. Appendix
440