Ricoh MP 2500 Manuel D’Utilisation

The Printer Function

75

Use the following procedures if printing does not start even after performing
[Print]

.

If the printing does not start, contact your service representative.

Printing does not start.

The power is off.

Check the cable is securely 
plugged into the power outlet 
and the machine. Turn on the 
main power switch.

Printing does not start.

The machine is set to “Of-
fline”.

Press the {Online} key.

Printing does not start.

The cause is displayed on the 
display panel.

Check the error message or 
warning status on the display 
panel and take the required 
action. See p.83 “When a Mes-
sage Is Displayed”.

Printing does not start.

The interface cable was con-
nected after the machine was 
turned on.

Connect the interface cable be-
fore turning on the machine.

Printing does not start.

The interface cable is not con-
nected correctly.

Connect the interface cable se-
curely. If it has a fastener, fas-
ten that securely as well. See 
“Connecting the Machine”, 
General Settings Guide.

Printing does not start.

The appropriate interface ca-
ble is not used.

The type of interface cable you 
should use depends on the 
computer. Be sure to use the 
correct one. If the cable is 
damaged or worn, replace it. 
See “Connecting the Ma-
chine”, General Settings 
Guide.

 is disabled.

A mechanical error might 
have occurred.

Contact your service repre-
sentative. See “List/Test 
Print”, General Settings 
Guide.