Metrologic Instruments IS1000 Manuel D’Utilisation
IS1000 – Configuration Guide
34
START OF CONFIGURATION
END OF CONFIGURATION
3.4.6. Check Digit Options
3.4.7. Product Code
The product code is represented by the last six digits (without the check digit) can
be transmitted alone:
be transmitted alone:
3.4.8. ISBN Conversion
This function converts UPC/EAN codes appearing on book into ISBN format.
The 3 leading digits and the check digit of UPC/EAN codes are suppressed and
the remaining 9 digits are transmitted with the ISBN check digit calculated by the
decoder.
the remaining 9 digits are transmitted with the ISBN check digit calculated by the
decoder.
EAN 13 CHECK DIGIT TRANSMITTED *
EAN 13 CHECK DIGIT NOT TRANSMITTED
EAN 8 CHECK DIGIT TRANSMITTED *
EAN 8 CHECK DIGIT NOT TRANSMITTED
UPC A CHECK DIGIT TRANSMITTED *
UPC A CHECK DIGIT NOT TRANSMITTED
UPC E CHECK DIGIT TRANSMITTED *
UPC E CHECK DIGIT NOT TRANSMITTED
ALL CHARACTERS TRANSMITTED *
PRODUCT CODE ONLY
UPC/EAN TRANSMITTED AS AN UPC/EAN *
UPC/EAN CONVERTED IN ISBN