Metrologic Instruments MS1690 Focus Manuel D’Utilisation

 

 

15

S

CANNER 

O

PERATION

 

 

 

Multi-Trigger, Out of Stand 
 

1.  The IR detects an object in the IR 

activation range and automatically 
turns on linear illumination. 

2.  Aim the scanner’s line of light  

over the bar code. 

3.  Pull the trigger to initiate scanning.  

The scanner’s light output will start to 
flash as it attempts to scan the 
bar code.   

  

 

If the trigger is released the 
scanner will stop trying to 
scan. 

 

 

4.  When scanner successfully reads the 

bar code it will beep once, the white 
LED will flash and the decoded data 
will be transmitted to the host.  

 
 

Presentation, In-Stand 
 

1.  The IR detects an object in the IR activation range and the scanner’s 

light output automatically starts to flash as it attempts to scan the bar 
code. 

2.  The scanner continuously attempts to scan the bar code until either it 

succeeds or the bar code is removed from the scanner’s field of view. 

3.  When scanner successfully reads the bar code it will beep once, the 

white LED will flash and the decoded data will be transmitted to the 
host. 
 

*  For additional configurable modes of operation, please refer to the Area 

Imaging Bar Code Supplemental Configuration Guide (

MLPN

 00-02281).