Olivetti D-COPIA 300MF Manuel D’Utilisation

Do not pull the power cord when removing it from the outlet. If the 
power cord is pulled, the wires may become broken and there is 
a danger of fire or electrical shock. (Always grasp the power plug 
when removing the power cord from the outlet.)

Always remove the power plug from the outlet when moving the 
machine. If the power cord is damaged, there is a danger of fire 
or electrical shock.

Always hold the designated parts only when lifting or moving the 
machine.

For safety purposes, always remove the power plug from the 
outlet when performing cleaning operations.

If dust accumulates within the machine, there is a danger of fire 
or other trouble. It is therefore recommended that you consult 
with your service representative in regard to cleaning of internal 
parts. This is particularly effective if accomplished prior to 
seasons of high humidity. Consult with your service 
representative in regard to the cost of cleaning the internal parts of the 
machine.

Do not place heavy objects on the machine or cause other damage to the 
machine.

During the use, do not

•

Open the front cover,

•

Turn off the main power switch,

•

Pull out the power plug.

When lifting or moving the machine, contact your service representative.

Do not touch electrical parts, such as connectors or printed circuit boards. 
They could be damaged by static electricity.

Do not attempt to perform any operations not explained in this guide.

Do not look directly at the light from the scanning lamp as it may cause your 
eyes to feel tired or painful.

This machine comes equipped with an HDD (hard disk drive). Do not 
attempt to move the machine while the power is still on. Since any resulting 
shock or vibration may cause damage to the hard disk, be sure to turn off 
the power before attempting to move the machine.