Olivetti D-COPIA 300MF Manuel D’Utilisation
Preparation before Use
2-10
OPERATION GUIDE
Configuring Network (LAN Cable Connection)
The machine comes with the network interface as standard and supports
each protocol of TCP/IP, IPX/SPX, NetBEUI and AppleTalk, allowing
network printing on various platforms such as Windows, Macintosh, UNIX
and NetWare.
each protocol of TCP/IP, IPX/SPX, NetBEUI and AppleTalk, allowing
network printing on various platforms such as Windows, Macintosh, UNIX
and NetWare.
Setting TCP/IP (When Using Fixed IP Address)
Follow the steps below to set TCP/IP when fixed IP address is used. Make
sure that IP address is available by asking your network administrator to
obtain it in advance.
sure that IP address is available by asking your network administrator to
obtain it in advance.
1
Press the System Menu key.
2
Press [System], [Change] of Network and then [Change] of TCP/IP.
3
Press [On] of TCP/
IP.
IP.
4
Press [Off] of DHCP.
5
Press [IP Address]
and enter IP address
using the numeric
keys.
and enter IP address
using the numeric
keys.
System - TCP/IP
Use TCP/IP.
On
Off
Cancel
OK
Status
10/5/2006 10:10
DHCP
On
Off
IP Address
Subnet Mask
Default
Gateway
0.0.0.0
0.0.0.0
0.0.0.0
System - TCP/IP
Use TCP/IP.
On
Off
Cancel
OK
Status
10/5/2006 10:10
DHCP
On
Off
IP Address
Subnet Mask
Default
Gateway
192.168.1.150
0.0.0.0
0.0.0.0