Olivetti 490 Manuel D’Utilisation

21

When you engage the line by lifting the telephone handset, you
may use all the telephone functions available on ordinary telephones
sold on the market.
These also include the R function (REGISTER RECALL, activated

by pressing the 

 key) which provides access to the special serv-

ices made available by the company that manages the telephone
network.

You can also use the following functions:

•

Call the correspondent using the fast dialling procedures set, see
"To telephone with one-touch dialling" and "To telephone
with speed dialling".

•

Momentarily hold a telephone call by pressing the 

 (HOLD)

key. The call is resumed as soon as the same key is pressed
again.

•

Activate the "handsfree" function, by pressing the 

 key

before or during a telephone call. This function is useful if you want
other persons at your end to take part in the conversation.

•

Stop the correspondent from listening to a conversation
at your end of the line, during a  "handsfree" telephone call.

Simply press the 

 key during the conversation. To enable the

correspondent to listen again, simply press the same key again.

 

-

Press the desired one-touch key, for example 

, for

more than one second. The display shows the digits of the
telephone number that you associated with it (see "To set
one-touch and speed dialling", chapter "Basic trans-
mission and reception operations"). If you also associ-
ated a name with it, the display will show this, too.

   

Once the number has been dialled, if the correspondent is

free, you can start talking. The display shows the length of
the call in minutes and seconds in the top right-hand corner.

NOTe

If you want to activate the "handsfree" function, having raised

the handset, press the 

 key. The display shows:

REPLACE HANDSET

   

Lift the handset to engage the line or press the 

 key to

activate the handsfree function. The display shows:

OFF HOOK      00:00

And the length of the call in minutes and seconds in the top
right-hand corner.

 

-

Press the desired one-touch key, for example 

. The

display shows the digits of the telephone number that you
associated with it (see "To set one-touch and speed
dialling", chapter "Basic transmission and reception
operations"). If you also associated a name with it, the
display will show this, too.

   

Lift the handset to engage the line or press the 

 key to

activate the handsfree function. The display shows:

OFF HOOK      00:00

And the length of the call in minutes and seconds in the top
right-hand corner.

    

The display shows:

TEL CALL
CODE OR < >

-

Type the desired speed dialling code, for example 

.

The display shows the digits of the telephone number that
you associated with it (see "To set one-touch and speed
dialling", chapter "Basic transmission and reception
operations"). If a name was also associated with it, the
display will show this, too.

Once the number has been dialled, if the correspondent is
free, you can start talking.

  

Lift the handset to engage the line or press the 

 key to

activate the handsfree function. The display shows:

OFF HOOK      00:00

And the length of the call in minutes and seconds in the top
right-hand corner.

    

The display shows:

TEL CALL
CODE OR < >

|

/

}

To locate the telephone number or name of the correspond-
ent you want to call.

 

To start dialling.

Once the number has been dialled, if the correspondent is
free, you can start talking.