Olivetti 2701 Manuel D’Utilisation
30
REDUCTION/ENLARGEMENT/ZOOM
There are three ways to enlarge and reduce copies:
●
Automatic ratio selection according to the paper size ........................... AUTOMATIC RATIO SELECTION (below)
●
Specifying a ratio with the reduce key, enlarge key, or zoom key ..................MANUAL RATIO SELECTION (p.31)
●
Separately selecting vertical and horizontal ratios ........................................................... XY ZOOM copying (p.32)
Ratios that can be selected vary depending on the following conditions:
AUTOMATIC RATIO SELECTION
The ratio is automatically selected based on the original size and paper size.
1
Place the original(s). (p.22, p.23)
The original size appears in the touch panel.
2
Touch the [PAPER SELECT] key and
then select the desired paper size.
then select the desired paper size.
The selected key is
highlighted and the paper
selection screen closes.
highlighted and the paper
selection screen closes.
3
Touch the [AUTO IMAGE] key.
A suitable ratio is
selected based on the
original size and selected
paper size. (The ratio
appears in the touch
panel.)
selected based on the
original size and selected
paper size. (The ratio
appears in the touch
panel.)
4
Select the number of copies and any
other desired settings, and then press
the [START] key (
other desired settings, and then press
the [START] key (
).
Original type setting
Original position
Selectable ratios
Other than super photo mode
Document glass
25 to 400%
RSPF
50 to 200%
Super photo mode
Document glass
50 to 200%
RSPF
50 to 141%
• If the original size does not appear in the
touch panel, specify the original size
manually. (p.47)
manually. (p.47)
• Automatic ratio selection is not possible if
the original or paper is a non-standard
size.
size.
If paper of the desired size is not loaded in
any of the trays, load paper of the required
size in a paper tray or in the bypass tray.
(p.19)
any of the trays, load paper of the required
size in a paper tray or in the bypass tray.
(p.19)
Note
A3
A4
PLAIN
RECYCLED
Note
AUTO
IMAGE
AUT
PAPER
1
COPY
• When automatic ratio selection is
selected, the [AUTO IMAGE] key is
highlighted in the main screen.
highlighted in the main screen.
• If the original and paper are in different
orientations, the image is automatically
rotated to match the paper orientation (for
paper sizes A4 (8-1/2" x 11") or less).
rotated to match the paper orientation (for
paper sizes A4 (8-1/2" x 11") or less).
• Rotation of the image can be disabled in
the key operator programs. (See the "Key
operator’s guide".)
operator’s guide".)
• If "IMAGE IS LARGER THAN THE COPY
PAPER." appears in the touch panel, part
of the image will be cut off in the copy.
of the image will be cut off in the copy.
To cancel automatic ratio selection, touch
the [AUTO IMAGE] key.
the [AUTO IMAGE] key.
Note
Note
T o cancel automatic ratio selection, touch the
[AUT O IMAG E ] key. Automatic ratio selection
also turns off automatically when the
enlargement key, the reduction key, or a
[ZOOM] key (
[AUT O IMAG E ] key. Automatic ratio selection
also turns off automatically when the
enlargement key, the reduction key, or a
[ZOOM] key (
/
) is touched to allow
the ratio to be selected.